The SEH UTN Manager is available in two versions:
Seh utn manager software#
The software tool ’SEH UTN Manager’ organizes the access of the USB dongles.
An interruption of the supply voltage may impair device performance or cause malfunctions. Electrostatic discharges (ESD) may impair device performance. Only use a certified USB cable (< 3 m) listed at. The device must not be directly connected to outdoor lines. Unauthorized modifications to the device can affect the product certification and are forbidden. The shielding must fit flushly to the connectors. For the connection to the RJ-45 connectors only STP cabling (category 5 or better) may be used. The RJ-45 connectors may only be connected to SELV voltages. Do not connect a telephone cable to the RJ-45 connectors. For more information, consult your retailer. Damaged power cords must be replaced immediately. Make sure that the device can be separated easily from the mains. Position the device in a way that guarantees that the sockets for the connection of the power cords are in the proximity of the device and are easily accessible. The device must be connected to sockets with safety contact. If the supplied power cords cannot be used in your country, acquire appropriate power cords that suit national provisions. Make sure that no-one steps on or stumbles over the cables. The device must only be connected and operated if it is in perfect condition. Avoid contact with humidity or liquids. Read the documentation and make sure that your system meets the requirements listed therein. Their purpose is to protect yourself and others from personal injuries, and to avoid damage to the equipment. The myUTN-800 is designed for the integration of USB dongles into TCP/IP networks.īefore starting the installation and the initial setup procedure as well during the operation of the UTN server, note the following safety regulations. UTN servers are network devices for use in office environments. The display panel on the front of the UTN server provides status information.įirmware/Software is being loaded onto the UTN server. If the activity LED blinks periodically atĭuring the activation procedure, the behavior of the The LEDs of the UTN server provide information about its status. Weight: 2950 g (with housing cover, without mounting brackets) The Quick Installation Guide provides a briefĭescription of the installation of the myUTN. Scope of SupplyĬheck the package content before getting started: The administration of the myUTN-800 is done via the 'myUTN Control Center'. The myUTN-800 itself can be mounted in a 19" server rack. The lockable housing cover of the myUTN-800 allows for a central and safe storage of the USB dongles. The SEH UTN Manager shows the availability of all UTN servers in the network and establishes a connection between the client and the USB port including the connected USB dongle. The SEH UTN Manager is installed on all clients that are intended to access a USB dongle in the network. The software tool 'SEH UTN Manager' handles the access to the USB dongles. For this purpose, the USB dongles will be connected to the USB ports of the myUTN-800. The Dongleserver 'myUTN-800' gives network participants access to USB dongles. Ĭonnecting the USB Dongle to the Client.Ĭonfiguring the UTN Server. 
Īssigning an IP Address to the UTN Server.Īdding the UTN Server to the Selection List.
Connecting the USB Dongle to the Client. Adding the UTN Server to the Selection List. Assigning an IP Address to the UTN Server.
0 kommentar(er)
